Categories
greenhouse

Characteristics of polycarbonate greenhouse Harvest PC

The depth of this substance is 4 mm.

If you want, you are able to boost the period of the structure to 6 yards or longer. To try it, it’s sufficient to join a two-meter extension. When picking a drawing, then focus on the distance between the arches. This figure should be 65 cm, that’s the most appropriate length for the specified thickness of the material. The width of the doorways according to the maker’s drawing is 90 cm.

Before assembling a polycarbonate greenhouse, then it is necessary to pick a location for its location. If this is done properly, you can provide yourself with a crop of fresh veggies for the whole calendar year.

The place for the upcoming greenhouse is marked instantly at the preparation of the garden plot. So as to melt the snow in the positioning of the greenhouse as soon as possible, the ideal point on the site is going to be a small elevation. Moreover, in such a place won’t need to worry about substantial humidity as dirt and atmosphere in the building.

Assemble a polycarbonate greenhouse on an elevated site – means to care for the best temperatures indoors.

When it isn’t possible to place a greenhouse on an elevated position, you’ll need to pour a layer of fine crushed stone about 20 cm and the exact same layer of fertile soil to make seedbeds.

Before building a greenhouse in your garden plot, you should also think about where and how this construction is going to be installed. To begin with, you must choose a place for it. The greenhouse ought to be found in a well-lit area no less than a couple meters away from homes, barns and other structures.

How to install a greenhouse according to the sides of the world

Be sure to level the dirt surface – it’s ideal to remove the surface. gidpostroy.ru This can also get rid of weed seeds. And for ease of work, remove the dirt in an area that is around a meter wider on each side of the rectangle that you desire.

It’s also worth thinking about having a foundation. As manufacturers say, today most greenhouses don’t need that, especially if they (greenhouses) are utilized only in the spring and summer period. However, seasoned anglers still recommend earning a basic foundation from a bar. It’s quite simple – it is enough to connect with each other utilizing metal corners and screws four parts of wood using a cross-section of 10 * 10 cm. The size of such a base ought to be equivalent to the base of the future greenhouse.

Simple bar foundation

You can also create a strip base of concrete. He’s more reliable than a pub foundation, but demands more fiscal and labor costs. By the way, the rainwater, which will be used in the winter, without it and do not do with it whatsoever.

Stages of the creation of a strip base: a schematic representation

Many manufacturers advise to install greenhouse structures without even building a foundation. Even for this intention, they equip the frame with special T-shaped legs, so that the structure was securely fixed. However, as practice shows, it’s still vital to construct a foundation: therefore and the foundation will be more securely fixed and the elements of the basis in touch with the ground, will be saved much longer in its original condition.

The major issue is to care for the material with special agents to protect the wood from moisture. The material is usually installed on concrete cubes which are dug into the ground. To get a six-meter arrangement, they want 10 pieces: four on either side and one in the middle of the ends.

Before you perform the greenhouse , you need to choose the ideal location for this. It must be an even website, so that the frame was located equally, without distortions. It needs to be sunny and not obscured by trees or buildings.