Categories
laying

Technology of Placing gypsum tiles with your hands

Gypsum tiles must be laid correctly, as not just the aesthetic look of cosmetic facing, but in addition the service life of the

substance will rely on the engineering of job. The product is also universal, and it can be attached to plaster, concrete, brick

or gypsum board sheets, provided the surface of the base is and has no defects.

In the event the flaws of the foundation are important, it ought to be completely treated with primer, then a cement mortar is

made, which matches all of the cracks. Then the surface ought to be primed and dried. Primer therapy is necessary to improve the

bond between the tile and the wall. In cases like this, its composition should decide on a special, comprising elements that

prevent the appearance of fungus and mold.

In the modern interior of these rooms most frequently used gypsum tiles, even imitating natural brick or stone. To perform

cosmetic finishing your self, it’s necessary firstly to select a strategy of tile placement and prepare a remedy. It’s very

important to look closely at the opposite side of this material. When its surface includes an embossed surface, then the glue

ought to be placed having an even trowel, also if it is even, then with a notched one.

The tech of the work is as follows:

* A thin layer of glue mortar is put on the pre-prepared wall. It is spread over the foundation so it is likely to place 4-5

tiles. Decorative cladding can be placed both on plasterboard, also on putty.

* Glue the rear side of these tiles with glue.

* Plaster components are pushed against the wall and their place is corrected. To align the seams, it is advised to use spacers.

* Finishing is performed in rows, each of which ought to be shifted by half a tile. Facing is carried out to the corners of this

space, then immediately eliminate any residual mortar at the joints.

Drying the walls requires no longer than a day also needs a constant humidity and temperature within the room. The final stage in

the laying of gypsum tiles is their decor. To get this done, the joints between the components are filled with a particular

solution, the shade of which suits the brick.

Cosmetic fake of brickwork on the walls will be carried out in the following manners:

* Cutting the darkened surface of the pits of masonry using a bolt cutter along with your own hands;

* placing of tiles beneath the brick:

* imitating the format and color of the side surface of one brick;

* Imitating a fragment of brickwork of many bricks.

The very best way to decorate”beneath the brick” is the one that permits you to create a usable coating with the most appearance

of its resemblance to natural masonry. All 3 methods to execute this sort of finishing functions fulfill the needs, however, the

cutting edge of joints using a bolt is more labor-intensive and the formation of large amounts of dust, so let us consider more

prevalent ways.

The old finish is removed from the walls, and the outside, if necessary, is leveled to get rid of the requirement to paste plaster

on a thick coating of adhesive.

Combining these cladding with other kinds of interior finishes could be both orderly and done with no clear consequences,

chaotically, together with imitation of signs of aging.

With the help of cosmetic gypsum tiles it’s possible to imitate a lot masterfasada.ru of textures.

A large number of textures may be imitated with the support of cosmetic gypsum tiles.

The wall where it’s to be installed must possess the following characteristics:

* Hardness and strength of the surface;

* The lack of irregular areas and sharp gaps;

* not any deformations.

Cosmetic tiles at the interior of the kitchen

Walls are created from a variety of substances, so let’s break down the principles of setup.

When working with concrete, there’ll not be any big problems. It is only necessary to take into consideration the porosity of this

material. Concrete, that has practically no pronounced pores, should be treated with a great primer.

Mounting gypsum tiles concrete

Before starting work on the installation of gypsum tiles on the walls, then it is worth assessing the strength of the surface.

After the plaster doesn’t fall off the walls and at the exact same time holds nicely, it is possible to simply paint it with

primer.

Mount the tiles onto the painted concrete shouldn’t. The surface ought to be scratched, ensuring to misfire, then it should be

grouted and coated with a coating of plaster.